Anti Vibration (AV) Rubber Mounts, Pads & Shock Isolators | Polymax India
Vibration Isolation | Rubber Isolator Mounts | Anti-Vibration Pads
Polymax are one of the largest anti-vibration mount distributors in the UK. With over 18,000 pieces in stock at any given time. Specialising in engine mounts, rubber bushings, shock mounts and many other vibration isolation parts. Polymax also offers a bespoke manufacturing service, with short lead times and small minimum orders.
Can't find what you need? Contact one of our experts. Call +44 (0)1420 474123 or email email@example.com
Cylindrical Anti Vibration Mounts
Various sizes and stud types available. Alternative Elastomers available for special order in CR, NBR, EPDM or NR
Universal KPUM Mounts
Consists of 2 parts; a rubber ring and a rubber bush bonded to a central metal spacer.
AD Shear Compression Mounts
AD shear compression mounts, designed to achieve high damping under compressive loads.
KPR Anti Vibration Mountings
Flanged mounting which uses rubber in shear and compression. Ideal for where a fail-safe mounting is essential.
KMR Anti Vibration Mounting
Originally designed for mounting marine engines; therefore they can be used for many mobile and static applications.
Achieves high isolation values of low frequency vibration. Attenuates shock loadings due to its deflection capacity.
Designed to stop twisting in installations. Suited to applications where primary load is in vertical compression.
Ultimate in Small Motor elastomeric focalised support. They have very high deflection for a relatively small mounting.
Pedestal Anti Vibration Mounts
The KPM 16539 mount has a low profile combined with relatively high deflection.
Sandwich mountings, suited to both compression and shear loading.
Center Bonded Bush
Center Bonded Mounts isolate vibration; reduce shock and noise due to vibration that is structure borne.
Ball joints allow flexible movement whilst tolerating heavy radial and axial loads.
CAB Anti Vibration Mounting
A compact fail safe design, Cutouts in rubber section on various sizes provide different vertical/horizontal stiffness ratios.
Various anti-vibration feet suitable for commercial and domestic applications. Adjustable, Stick on and Screw on.
Allows elimination, of high frequencies through the elastic deflection of the rubber under the effect of the external couples which act on the metalic tubes.
Fully Bonded Bush
Two concentric sleeves with rubber securely bonded between them. Designed to take up axial and radial loads as well as torsional movements.
DP Buffer Springs
The DP Mounts are highly deformable, which allows for a high degree of energy to be absorbed on impact.
Anti-Vibration Pad, the Polymax Anchor Mat
A specially compounded low hardness anti-vibration pad for reducing vibrations.
Flexible Locator Mount
The mounts work in Compression (axial) and Shear (radial). 80% Reduction of Energy due to Vibration.
The Shock Mounts are designed to absorb shock for static equipment.
For attenuating the vibration of equipment, which are subject to displacement during operation.
The mounts can be used in cases where the product is subjected to high torsion and stress during operation.
F-Type Shear Mounts
F-type mounts are designed for vibratory equipment to give maximum isolation.
KP Series Rubber Mounts
Circular Mount with centre hole. Stainless steel metal plate is available on request.
KPN Pedestal Mount
The KPN Pedestal mount is designed for use on alternators and static generators.
KPX / KPXM Mounts
Type X Mounts or Marine Leaf Springs are approved by the MoD for Naval use.