For UK enquiries please visit polymax.co.uk or contact us on 01420 474123 | Email sales@polymax.co.uk
(0) 98200 50138
(0) 76780 05003
(0) 80976 45424
Rs INR
Rs Indian Rupee (INR)
Change currency:
  • £ British Pound Sterling (GBP)
  • € Euro (EUR)
  • zł Polish Zloty (PLN)
  • $ US Dollar (USD)

sales@polymax.in
You have no items in your shopping cart.
0
Cart

Solid Silicone Sheet | Silicone Rubber Sheets | Polymax India

Silicone offers many advantages over other forms of elastomers. It is well known for its use in food, pharmaceutical and other clean industry applications. It is a resilient material capable of maintaining many of its properties at extremely low and high temperatures.

Some grades of silicone rubber can remain flexible, and show low levels of compression set, down to temperatures as low as -100 °C and as high as 315 °C. It is naturally electrically insulating but can be compounded to offer high resistance for the bleeding of static charges or to offer a low resistance to conduct signal voltages. High tear resistance, good elongation at break and tensile strength are some of the other characteristics of silicone.

Silicone will keep constant even at high temperatures, but should not be used with high pressure steam. Silicone has excellent resistance to heat (dry air), at +200°C intermittent and will remain flexible at low temperatures of -70°C and is also resistant to ultra-violet light, Ozone, sea water and weathering. Silicone also exhibits low in flammability and low smoke toxicity.

Polymax silicone solid sheets are available in 1.2 metres width and can be bought as individual 1 metre lengths or multiples of 1m and are available in 10m or 5m rolls depending on the thickness. Colours include; translucent (opaque), white, red oxide as standard and blue, grey and black are readily available. The thickness range are between 0.3mm and 12mm, although other thicknesses can be supplied on request. The standard hardness is 60° shore and we can offer hardness from 30° to 80° in some instances. Please ring an advisor to check if unsure.


This general purpose silicone sheeting is available in both FDA or a low cost economical grade. Sold per linear metre from 0.5mm - 6mm thick.

Silicone offers many advantages over other forms of elastomers. It is well known for its use in food, pharmaceutical and other clean industry applications.

Sold in linear meter lengths.

FDA = Complies with Food & Drugs Association

GP = General Purpose

Silicone sheeting has no resistance to oils

Available with pressure sensitive adhesive backing and fabrication service to create gaskets or strips - please call us for more information.

Rubber sheet tolerance allowance - width 3%, length 5%.
This general purpose silicone sheeting is available in both FDA or a low cost economical grade. Sold per linear metre from 0.5mm - 6mm thick.

Silicone offers many advantages over other forms of elastomers. It is well known for its use in food, pharmaceutical and other clean industry applications.

Sold in linear meter lengths.

FDA = Complies with Food & Drugs Association

GP = General Purpose

Silicone sheeting has no resistance to oils

Available with pressure sensitive adhesive backing and fabrication service to create gaskets or strips - please call us for more information.

Rubber sheet tolerance allowance - width 3%, length 5%.
This general purpose silicone sheeting is available in both FDA or a low cost economical grade. Sold per linear metre from 0.5mm - 6mm thick.

Silicone offers many advantages over other forms of elastomers. It is well known for its use in food, pharmaceutical and other clean industry applications.

Sold in linear meter lengths.

FDA = Complies with Food & Drugs Association

GP = General Purpose

Silicone sheeting has no resistance to oils

Available with pressure sensitive adhesive backing and fabrication service to create gaskets or strips - please call us for more information.

Rubber sheet tolerance allowance - width 3%, length 5%.
This general purpose silicone sheeting is available in both FDA or a low cost economical grade. Sold per linear metre from 0.5mm - 6mm thick.

Silicone offers many advantages over other forms of elastomers. It is well known for its use in food, pharmaceutical and other clean industry applications.

Sold in linear meter lengths.

FDA = Complies with Food & Drugs Association

GP = General Purpose

Silicone sheeting has no resistance to oils

Available with pressure sensitive adhesive backing and fabrication service to create gaskets or strips - please call us for more information.

Rubber sheet tolerance allowance - width 3%, length 5%.
This general purpose silicone sheeting is available in both FDA or a low cost economical grade. Sold per linear metre from 0.5mm - 6mm thick.

Silicone offers many advantages over other forms of elastomers. It is well known for its use in food, pharmaceutical and other clean industry applications.

Sold in linear meter lengths.

FDA = Complies with Food & Drugs Association

GP = General Purpose

Silicone sheeting has no resistance to oils

Available with pressure sensitive adhesive backing and fabrication service to create gaskets or strips - please call us for more information.

Rubber sheet tolerance allowance - width 3%, length 5%.

High tear strength vacuum or lamination process material with self healing properties

  • High tear strength
  • High elasticity (750%)
  • Improved abrasion resistance
  • Ability to withstand puncture damage without catastrophic failure
  • Durability and Lifespan
  • Developed specifically for use as a vacuum bagging material
  • Supplied as standard in Translucent
  • Capability to colour match if required
Rubber sheet tolerance allowance - width 3%, length 5%.

High temperature silicone sheeting suitable for working conditions up to 300°C.

Sold in linear meter lengths.

FDA = Complies with Food & Drugs Association

Silicone sheeting has no resistance to oils

Available with pressure sensitive adhesive backing and fabrication service to create gaskets or strips - please call us for more information.

Rubber sheet tolerance allowance - width 3%, length 5%.

High quality grade silicone sheet with great transparency and mechanical properties.

Rubber sheet tolerance allowance - width 3%, length 5%.

Glass clear silicone suitable for near invisible protection on electrical equipment and keypads.

Ultra-thin Crysta Clear silicone film is produced using addition-cured silicone, and manufactured under cleanroom conditions to produce flawless, uniform films of equal thickness.

Magnetic sheeting that allows metal fragments to be found and isolated safely.

Rubber sheet tolerance allowance - width 3%, length 5%.

Carbon black filled silicone material that can conduct a low electrical amperage.

Rubber sheet tolerance allowance - width 3%, length 5%.

This sheeting provides the same mechanical properties as silicone with an improvement to fuel and mineral oil resistance.

Rubber sheet tolerance allowance - width 3%, length 5%.

London underground compliant flame-retardant sheeting suitable for use with mass transport systems.

Rubber sheet tolerance allowance - width 3%, length 5%.
Cookie Notice.
This websites use cookies. By continuing to browse the site you are agreeing to our use of cookies.