Polymax solid silicone white square section is resilient and versatile. It is ideal for industries where adverse temperatures are an issue – or where an inert, robust polymer is required to be exposed to extreme temperatures (-60°C to +200°C). Our silicone extrusions also have excellent ozone/radiation resistance, UV resistance and arc/corona resistance. These properties are maintained well at high and low temperatures. Silicone section is not suitable for contact with oils, solvents, dilute alkalis or concentrated acids.
Products comply with industry standards, such as those of the Food and Drug Administration (FDA) regulation 21CFR177.2600 for rubber articles in repeated contact with food, and EC 1935/2004 on materials and articles intended to come into contact with food, and the Water Regulations Advisory Scheme BS69200 (WRAS).
|Sell by the metre||Yes|
|Cross Section Type||Square|
|Hardness (Shore A)||60|
|Maximum Temperature (°C)||230.00|
|Minimum Temperature (°C)||-60.00|
|Elongation at break (%)||400.00|
|Tensile Strength (MPa)||10.00|
|Compression Set (%)||13.00|
|Compression Set Testing Parameters||24hrs @150|