For UK enquiries please visit or contact us on 01420 474123 | Email
(0) 98200 50138
(0) 76780 05003
(0) 80976 45424
Rs Indian Rupee (INR)
Change currency:
  • £ British Pound Sterling (GBP)
  • € Euro (EUR)
  • zł Polish Zloty (PLN)
  • $ US Dollar (USD)
You have no items in your shopping cart.

ORBIK Rubber Grass Mat

Not Available to Buy Online - Please contact us for more information.

 (0) 98200 50138

Be the first to review this product

Quick Overview

Premium safety mat with excellent drainage.
  • Raised studded underside to prevent mats from slipping on grassy or uneven surfaces
  • Smaller open-holed design gives superior anti-slip properties, increases comfort underfoot, allow for greater drainage and helps support grass growth
  • Hardwearing Natural Rubber helps prevent fatigue build up
  • RAPRA tested to critical fall heights of up to 3.4 metres
  • Ideally suited for playgrounds or as a permanent grass covering in overflow or off-road parking areas
  • Tile Size: 1.5m x 1m x 22mm
No options of this product are available.


Polymax ORBIK- has anti-fatigue and anti-slip features. Holes in the design of the mat to ensure easy cleaning and good drainage. Hosing down or Jet washing are the recommended ways to keep these mats clean.

As featured in BBC program "Garden Invaders" Polymax ORBIK matting has been successfully used in grassed areas. Once grass has grown through the holes in the matting; the mats virtually disappear from view leaving a safe and comfortable grass area.

Orbik mats have been tested by RAPRA and is suitable for playground surfaces and is also strong enough for permanent overflow car parks.

Molded rubber connecting hinges or cable ties can be used to join ORBIK mats, creating a solid rubber mat area. Pegs can be used to fix them into position so they do not shift over time.

Natural Rubber & Styrene-ButadieneThis Product Does not Require AdhesiveHigh Anti-Slip

Additional Information

Colour Black
Material NR/SBR
Width (mm) 1000.00
Thickness (mm) 22.00
Hardness (Shore A) 65
Maximum Temperature (°C) 60.00
Minimum Temperature (°C) -10.00
Tensile Strength (MPa) 4.00
Elongation at break (%) 250.00
Abrasion Resistance (mm³) (DIN53516) 400
*Dimensions can vary, they are typical only.

Further Information (File Downloads)

Cookie Notice.
This websites use cookies. By continuing to browse the site you are agreeing to our use of cookies.