Details
MALE - FEMALE Cylindrical mounts, a simple and cost effective mount. For use in compression and shear. A very large range of available size and studs.
Can be made in CR, NBR, EPDM, Gray NR Elastomers plus stainless steel thread.
Article numbers explained, using B1015M36-1 as the example:
B 10 15 M3 6 - 1 |
|
Explanation |
B |
Male / Female anti-vibration mount. |
10 |
(D) Diameter of the mount in mm. |
15 |
(H) Height of the mount in mm. |
M3 |
(G) Thread type. |
6 |
(L) Thread length in mm. |
1 |
See table below for shore hardness values |
Code |
Shore Hardness |
0 | 35 ShA |
0.5 | 40 ShA |
1 | 45 ShA |
1.5 | 50 ShA |
1.55 | 55 ShA |
2 | 60 ShA |
2.5 | 65 ShA |
3 | 70 ShA |
3.5 | 75 ShA |
4 | 80 ShA |
4.5 | 85 ShA |
5 | 90 ShA |
Code |
Material |
CR | Chloroprene |
EP | EPDM |
HN | HNBR |
NBR | Nitrile |
NR | Natural Rubber |
SIL | Silicone |
SW | White Silicone |
SR | Red Silicone |
V, FKM | Viton / FKM |
Code |
Metal |
A2, SS304, SS | Stainless Steel (A2) |
A4, SS316 | Stainless Steel (A4) |
Additional Information
*Dimensions can vary, they are typical only.