For UK enquiries please visit or contact us on 01420 474123 | Email
(0) 98200 50138
(0) 76780 05003
(0) 80976 45424
Rs Indian Rupee (INR)
Change currency:
  • £ British Pound Sterling (GBP)
  • € Euro (EUR)
  • zł Polish Zloty (PLN)
  • $ US Dollar (USD)
You have no items in your shopping cart.

Mapei VZ Contact Adhesive

Not Available to Buy Online - Please contact us for more information.

 (0) 98200 50138

Be the first to review this product

Quick Overview

Particularly suited for the fixing of rubber floor on vertical or curved surfaces where immediate grip is required.
Article No. Product Name Max Coverage (m²) Weight (Kg)
3005019 Mapei VZ contact adhesive 1kg 31


Where to use:

  • POLYMAX ADESILEX VZ has a low viscosity and can be used with most substrates and also on vertical walls for immediate grip.
  • Typical substrates include walls, floors, ceilings, wood, hardboard, metal and light alloys (in case of doubt always carry out a preliminary test on small test area)
  • After setting POLYMAX ADESILEX VZ has high adhesion and elasticity.Resistance to temperature and ageing is also excellent.
  • Not suitable for use on Fermacell building board.


Consistency: liquid
Color: beige
Density: 0.9 g/cm3 ± 0.1
Brookfield viscosity: 4.000 cPs ± 1.000 ± rotor 4 - 20 RPM 2%
Dry solid content: 27% ± 1
Storage: 12 months in original sealed packaging.
Health hazard according to EEC 88/379: yes
Inflammability: yes
Customs class: 3506 91 00


APPLICATION DATA at +23°C - 50% R.H.:
Application temperature range:
+10°C to +35°C
Waiting time: maximum 20 minutes at +23°C
Development of the bond:: immediate at +23°C
Development of complete bond: few days depending on temperature


Resistance to moisture: excellent
Resistance to ageing: excellent
Test of adhesion PEEL 90° in compliance with DIN 16860 after 14 days at +23°C: homogeneous PVC: 1.8 N/mm

Additional Information

Colour Beige
Density (g/cm³) 0.90
Dry Solids Content (%) 27.00
Max Coverage (m²) 16
Test of adhesion PEEL 90° (N/mm) 1.80
*Coverage is an estimate, based on using an A2 spreader. Also depends on the application the adhesive is used on. WARNING : Although the technical details and recommendations contained in this report correspond to the best of our knowledge and experience, all the above information must, in every case, be taken as merely indicative and subject to confirmation after long-term practical applications; for this reason, anyone who intends to use the product must ensure beforehand that it is suitable for the envisaged application. In every case, the user alone is fully responsible for any consequences deriving from the use of the product.

Further Information (File Downloads)

Cookie Notice.
This websites use cookies. By continuing to browse the site you are agreeing to our use of cookies.